Dpm Tapes Silicone Door Draught Excluder with 3M Adhesive, Cutable Seal for Armored Doors, Windows and Shower Cabins, 35 mm x 5 m, Transparent

About this item

• Under door weather stripping 35 mm x 5 m – Transparent flexible silicone seal with 3M self-adhesive tape. The 5-metre roll can be measured and cut to create a continuous strip under the door or along the edges of the frame.
• Against drafts, dust, and light – Positioned with the flap touching the floor or the frame, it helps reduce the passage of hot and cold air, dust, light, and small insects through the gap. It can also reduce some of the noise coming from the other side.
• For security doors, windows and shower cubicles – suitable as a draught excluder for entrance doors and compatible window edges. The transparent finish remains discreet; on the smooth profiles of the shower box, perform an adhesion test first and check the behaviour in a moist environment.
• Clean and precise application – Measure the length, cut the silicone, clean and thoroughly dry the support, then align the strip. Remove the liner little by little and press firmly along the entire adhesive, avoiding stretching the material or creating folds.
• Check compatibility first – The strip is 35 mm wide: check the width of the gap, the area available for the adhesive, and the sliding space. Do not apply on wet, dusty, oily, porous or friable surfaces; sealing and removal depend on the support.
• Under door weather stripping 35 mm x 5 m – Transparent flexible silicone seal with 3M self-adhesive tape. The 5-metre roll can be measured and cut to create a continuous strip under the door or along the edges of the frame.
• Against drafts, dust, and light – Positioned with the flap touching the floor or the frame, it helps reduce the passage of hot and cold air, dust, light, and small insects through the gap. It can also reduce some of the noise coming from the other side.
• For security doors, windows and shower cubicles – suitable as a draught excluder for entrance doors and compatible window edges. The transparent finish remains discreet; on the smooth profiles of the shower box, perform an adhesion test first and check the behaviour in a moist environment.
• Clean and precise application – Measure the length, cut the silicone, clean and thoroughly dry the support, then align the strip. Remove the liner little by little and press firmly along the entire adhesive, avoiding stretching the material or creating folds.
• Check compatibility first – The strip is 35 mm wide: check the width of the gap, the area available for the adhesive, and the sliding space. Do not apply on wet, dusty, oily, porous or friable surfaces; sealing and removal depend on the support.